NANO32 IoT Development Board - 4MB

NANO32 IoT Development Board - 4MB
Item# NANO32-4MB
$20.00, 10/$180.00

Product Description:

        NANO32
by Gravitech & MakerAsia



          



*** ALL NANO32 order will be shipped directly from our manufacture in Thailand.***



NANO32 Features



  • 40MHz Crystal for CPU, 32.768KHz Crystal for RTC and low power operation
  • 4MB Flash (32Mbit)
  • FTDI231 for USB to Serial
  • Auto-Reset for automatic flash
  • 3.3V 0.5A Regulator (tested for working up to 1A)
  • 2.5dBi Peak Gain, 0.5dBi Average Gain Chip Antenna
  • High quality PCB: design and manufacture in Thailand





The ESP32 is the latest chipset to be released by Shanghai-based, Espressif Systems that combines both Wi-Fi and Bluetooth (BT) capabilities within its dual CPU core and a rich accompaniment of hardware peripherals. Designed as an ultra low power chip using TSMC 40nm technology, it employs a customised CPU design based on the Cadence® Tensilica® Xtensa® Dual-Core 32-bit LX6 600 DMIPS.

The Nano32 produced by the designers of Arduino Nano and Espresso Lite (Thailand-based Gravitech and MakerAsia respectively) is the first third-party development board that provides another alternative to the eager-beavers community of geeks, makers, hackers and developers interested in the latest Wi-Fi/BT combo 'wonder' chip.





Key Features    

  • Xtensa® Dual-Core 32-bit LX6 microprocessors, up to 600 DMIPS
  • Integrated 520 KB SRAM
  • Integrated 802.11BGN HT40 Wi-Fi transceiver, baseband, stack and LWIP
  • Integrated dual mode Bluetooth (classic and BLE)
  • 4 MByte flash (32Mbit)
  • 2.2V to 3.6V operating voltage
  • -40°C to +125°C operating temperature



Wi-Fi   

  • 802.11 b/g/n/e/i
  • 802.11 n (2.4 GHz), up to 150 Mbps
  • 802.11 e: QoS for wireless multimedia technology
  • WMM-PS, UAPSD
  • A-MPDU and A-MSDU aggregation
    Block ACK
  • Fragmentation and defragmentation
  • Automatic Beacon monitoring/scanning
  • 802.11 i security features: pre-authentication and TSN
  • Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)
  • Infrastructure BSS Station mode/SoftAP mode
  • Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P
  • Power Management
  • UMA compliant and certified
  • Antenna diversity and selection



Bluetooth 

  • Compliant with Bluetooth v4.2 BR/EDR and BLE specification
  • Class-1, class-2 and class-3 transmitter without external power amplifier
  • Enhanced power control
  • +10 dBm transmitting power
  • NZIF receiver with -98 dBm sensitivity
  • Adaptive Frequency Hopping (AFH)
  • Standard HCI based on SDIO/SPI/UART
  • High speed UART HCI, up to 4 Mbps
  • BT 4.2 controller and host stack
  • Service Discover Protocol (SDP)
  • General Access Profile (GAP)
  • Security Manage Protocol (SMP)
  • Bluetooth Low Energy (BLE)
  • ATT/GATT
  • HID
  • All GATT-based profile supported
  • SPP-Like GATT-based profile
  • BLE Beacon
  • A2DP/AVRCP/SPP, HSP/HFP, RFCOMM
  • CVSD and SBC for audio codec
  • Bluetooth Piconet and Scatternet



Sensors    

  • Ultra low noise analog amplifier
  • Hall sensor
  • 10x capacitive touch interface
  • 32 kHz crystal oscillator


32x GPIO    



  • 3 x UARTs, including hardware flow control
  • 3 x SPI
  • 2 x I2S
  • 12 x ADC input channels
  • 2 x DAC
  • 2 x I2C
  • PWM/timer input/output availabe on every GPIO pin
  • OpenOCD debug interface with 32 kB TRAX buffer
  • SDIO master/slave 50 MHz
  • Supports external SPI flash up to 16 MB
  • SD-card interface support


Security Related



  • IEEE 802.11 standard security features all supported, including WFA, WPA/WPA2 and WAPI
  • Secure boot
  • Flash encryption
  • 1024-bit OTP, up to 768-bit for customers
  • Cryptographic hardware acceleration:
    – AES
    – HASH (SHA-2) library
    – RSA
    – ECC
    – Random Number Generator (RNG)



Development Support

  • SDK Firmware for fast on-line programming
  • Open source toolchains based on GCC