This board allows you to control high voltage and high current loads with your microcontroller project. This board is fully assembled with standard spaced mounting holes for easy integration into your new or existing projects. Simply connect your low voltage and high voltage leads, and start controlling your robotics, household automation, or other controller dependent projects right out of the box! This board is great for applications where you want to safely isolate your microcontroller logic from your high voltage or high current circuits (and the noise they create for) up to 2 channels.

Great news for Arduino Nano owners!!!

We're excited to launch these new add-on modules for the Arduino Nano. They enhance the ability of the Arduino Nano while maintaining breadboard friendliness and ease of quick prototyping. Below are some of the modules. More to come soon!

ETHERNET-4NANO: Open Arduino Nano to the internet.
MP3-4NANO: Play MP3 files on the Micro-SD card.
USBHOST-4NANO: Open communication to USB devices.
XBEE-4NANO: Wireless communication with ability to update firmware OTA.
2MOTOR-4NANO: Enables mechanical projects to control up to two DC motors and has built-in feedback loop circuitry.

Get yours today!

This add-on module allows you to connect the Arduino Nano to the internet. You get all of the benefits of using the Arduino Nano. This includes breadboard friendliness for quick prototyping. It is fully assembled with long pin headers so you don’t need to purchase and solder the headers separately. You’re ready to go out of the box. Yes, you get the same stackable benefits as the Arduino shields and can run the same code.

This add-on module allows you to play MP3 files using the Arduino Nano. You get all of the benefits of using the Arduino Nano. This includes breadboard friendliness for quick prototyping. It is fully assembled with long pin headers so you don’t need to purchase and solder the headers separately. You’re ready to go out of the box!

Looking for project to interface with Android* phone and tablet?

This add-on module allows you to interface with USB devices using the Arduino Nano. The communication is compatible with full and low-speed USB devices – mice, keyboards, joysticks, cameras, Android* devices and more. You get all of the benefits of using the Arduino Nano. This includes breadboard friendliness for quick prototyping. It is fully assembled with long pin headers so you don’t need to purchase and solder the headers separately. You’re ready to go out of the box!

Want to update your Arduino Nano firmware OTA (over-the-air)?

This add-on module allows you to interface with XBee wireless module using the Arduino Nano. You can use it for wireless communication and wireless firmware update. You get all of the benefits of using the Arduino Nano. This includes breadboard friendliness for quick prototyping. It is fully assembled with long pin headers so you don’t need to solder and purchase the headers separately. You’re ready to go out of the box!

This add-on module allows you to control up to two DC motors at maximum of 2A/motor using the Arduino Nano. You get all of the benefits of using the Arduino Nano. This includes breadboard friendliness for quick prototyping. It is fully assembled with long pin headers so you don’t need to purchase and solder the headers separately. You’re ready to go out of the box!

Flyport is a revolutionary Wi-Fi module based on the open source platform openPICUS. It is a Wi-Fi compact module (only 35*48mm) designed around the Microchip PIC 24FJ256GA106 processor (256K Flash,16K Ram,16 Mips) and MRF24WB0MA/RM WI-FI Certified Transceiver. It is very easy to use; comes with many references/examples and free IDE!

FiO Std is a breadboard friendly development board using RapidSTM32 technology which base on a Simulink device driver blockset and tool suite for STM32 microcontroller family.

Ultimately, the blockset is expected to enable users to transfer their designs from Simulink, with just one click, to a working embedded system (based on STM32 microcontrollers) without the need to write a single line of C or Assembly code.

The blockset works by taking advantage of the Mathworks Inc.'s products, i.e. Real-Time Workshop and Real-Time Workshop Embedded Coder, code generation capability.

Looking for PICAXE programmer breakout board? This board breakout PICAXE programmer pins for ease of use.

This Stereo Jack 3.5mm breakout board bring all 4 pins of a 3.5mm stereo jack out to screw terminal blocks for easy connection and prototyping work (1.left, 2. right, 3. ground, 4. jack present detection). The connections are also available via 0.1" header pins.

Looking for Microchip ICD breakout board? This board breakout MPLAB ICD3 or MPLAB REAL ICE PIC programmer for ease of use.

This RJ11 breakout board bring all 6 pins of a 6P6C modular jack out to screw terminal blocks for easy connection and prototyping work. The connections are also available via 0.1" header pins.

This breakout board bring all 15 pins of a DB15 VGA connector plus a chassis pin out to screw terminal blocks for easy connection and prototyping work. The connections are also available via 0.1" header pins. We've included a male header strip with the item.

This breakout board bring all 25 pins of a DB25 female connector plus a chassis pin out to screw terminal blocks for easy connection and prototyping work. The connections are also available via 0.1" header pins.

This breakout board bring all 25 pins of a DB25 male connector plus a chassis pin out to screw terminal blocks for easy connection and prototyping work. The connections are also available via 0.1" header pins.

The new exciting high-performance STM32F103 Development Board. This board is packed with features and power, utilizing the latest microcontroller technology with the new ST Microelectronics STM32F103 Microcontroller based on the high-performace 32-Bit ARM Cortex-M3 Processor running up to 90 MIPS.